@Mart-van-Walderveen Ok, het was een mogelijkheid...;-)

@Deividas-Žalga This is happening if your next Point is nor a shaping point, nor a via point, but the finish of the route. I had the same thing today, when I replanned my route here in Norway to a direct point to point route, because of the really bad weather. If you switch in the APP to the „drop“ sign, for shaping points, you will see the same information, but with the shaping point drop with a question mark in it. Ultimately nothing to worry about. Greetings Thomas

@Peter-Schiefer Hallo Peter, ich habe für MRA-Gold und Nav-App als Lifetime Bundle geholt. Ich werde die Wanderrouten wohl weiterhin mit Outdooractive planen und auch von dort auf mein Wander GPS spielen. Ich hatte nur gehofft/gedacht, ich könnte bei der Urlaubsplanung alle Routen und Wanderungen gleich in MRA mitspeichern und so immer alles (an einem Ort) mit dabeihaben. Mit dem MRA Connector hätte ich dann auch gleich die Wanderrouten auf mein Garmin spielen können. Ich denke ich habe zwar einen Weg gefunden wie auch in MRA möglichst getreu die Route dargestellt/übernommen wird, da ich aber dann immer kontrollieren und nachbearbeiten muss, bleibt der direkte import aus Outdooractive wohl die beste Lösung. Wie gesagt, stört mich nicht, es ging mir nur um "alles an einem Ort". Lieben Dank, und die Information, dass GPX Punkte limitiert sind wusste ich auch noch nicht. Grüße aus Aachen Jörg

@abowen said in Sharing routes with friends: Follow-up question, if I share a route today and a friend "uses" my route and copies it into their library, it's a point in time copy? If I change the route tomorrow the new changes will not be applied to my friends copy? Yes? Correct, once the route is in your friends library it is their copy of your route.

@GT-JWR said in Avoiding Highways for part of a route: @Andy-Mitchell-0 currently cannot do that in 'one' plan, you would have to break it down, combine, etc. Great idea/suggestion though - I hope the Developers have had this suggestion before and are taking it under advisement. segments.

@paul69 searching on the Forum I found it anyway

@Marco-7v said in Buitenland bezocht: @Marco-7v Vandaag een tracklog gestart op duitse bodem. Ongeveer 30 km gereden, maar bij thuiskomst staat Duitsland niet bij de prestaties. Er staat wel een duits vlaggetje voor de bewuste tracklog. Denk dat ik toch wat meer duitse kilometers zal moeten maken Da's vreemd, maar meer kilometers is niet nodig. 30 km is lang zat! Je geeft wel aan dat je begonnen bent in Duitsland, wellicht dat het maken heeft dat je in NL geëindigd bent? De routes die ik in Suriname heb getracked beginnen en starten in Suriname en dat is goed gegaan. En daar zit zelfs een tracklog tussen van nog geen km lang.

@Peio, Devs are reading along in this forum. And other people would also be interested in possible problems and suggestions for improvement. Besides that, many people here are willing to try and help you out with problems you have. Given the fact that so many people use MRA to full satisfaction, have you considered that your problems might just be your misunderstanding of the app? If you are only out to blame MRA for your disappointment, it might just not be worth the effort since it seems you already made up your mind, so...

@Con-Hennekens Bedankt voor de tip en inderdaad het schoot mij vandaag te binnen dat ik zoiets onlangs op een filmpje van MRA had gezien alleen dat desbetreffende filmpje met uitleg kan ik niet terug vinden. Maar ga het uitproberen.

@Con-Hennekens Het lijkt erop dat de bewuste tracklog toch nog aanwezig is. Alleen niet onder de naam van de trackdatum zoals meestal gebeurt, maar onder de naam van mijn adres.

@Nick-Carthew Ha! yes, I realise that now...I must have been living in an alternate reality when I thought I could do it. Thanks for replying

@Colin-Hodgkinson [image: 1717162288414-75bd1d43-60a5-481d-95db-e34e97603e39-image.png] The planning map is the data on which the route calculation is made (and of course it has its own default visual map). The map overlay is a layer with visual map only. You can choos the google msp overlay, but your route is still calculated over the chosen "main" map.

Hi, I solved my problem with a new Sena Spider ST1

hi @Alan-Bowne yes you can left hand pane in the routes menu [image: 1717003468451-screenshot-2024-05-29-at-18.21.02.png] click routes then click add [image: 1717003927335-screenshot-2024-05-29-at-18.21.50.png] pick an already planned route you can change the colour if you want to compare several [image: 1717003651312-screenshot-2024-05-29-at-18.22.26.png] this will then show on map [image: 1717003684565-screenshot-2024-05-29-at-18.23.26.png]

@Paul-Johnson-5 There is no fix required for the reason @Herko-ter-Horst mentioned some time ago in this thread. See above

@Peter-Schiefer Thank you Peter, I have the alpen road update but just wondered if it was as live as MRA. Thanks

@Carl-Flint said in Bluetooth external controller on ios: Why spend a lot of money on a smartphone and expose it to hazards. This the main reason why I like the CP device. Exactly for this reason I use a cheap Android rugged phone for navigation on my motorbike. My Pixel 8 Pro with terrific camera stays safely in my pocket. Still I can use the complete app, with controller if I want, without the restrictions Apple en Google impose in CP/AA