transfer from phone to zoom xt

[Travellexxie]

I had to restart the app and now everything is working fine, tablet and phone.

[J2FK]

Ik was reeds terug gegaan naar een vorige versie en ga die denk ik nog wat houden, tenzij er een meerwaarde is aan de nieuwe versie. Wat mag die dan eventueel zijn?

[Mike wiruth]

@Kobutex-Motorreizen Can you explain how I can get my routes to my Zumo XT using a cable? I'm leaving this Saturday and have all my routes on my phone, but like to have them on the garmin too. Especially if it's raining. How do I do it?
Thanks very much for your help.
Mike

[Peter Zehentreiter]

@Mike-wiruth Connect your Garmin to your computer.
Drag or copy the GPX file to the GPX folder on your Garmin.

zūmo XT Owner's Manual - Transferring GPX Files From Your Computer https://share.google/JWKFXr2WbfmiWbmmT

[AWDC LAO]

On a Mc use an SD-card, not a cable.

[Marinus van Deudekom]

@Peter-Zehentreiter in my opinion unnecessary complicated. Just connect the XT to your computer. Wait until the device and sd are recognised then use the connector in MRA to export the route using the 1.2 format. Works like a charm

[Peter Zehentreiter]

@Marinus-van-Deudekom Well, that's not exactly complicated...
I'm simply describing the standard method for transferring GPX files to a Garmin device.

I realize there are different ways to do it, and I know how they work.

[Travellexxie]

@Marinus-van-Deudekom MRA connector and XT with sd-card. I wish you lots of succes, most of the time it will not succeed with a sd-card.
Save the route(s) and drag them, in case of more routes, to the XT itself (I use good old Total Commander for it), de SD is in my case only for music. In case of emergency (XT has to set back to factory settings or hard reset) you can put them on your XT with your phone and the Drive app.
I agree with the 1.2

[Marinus van Deudekom]

@Travellexxie What I meant was if you want to tranfer using the cable connection wait for Windows to recognise both the XT and the SD card. Don't trafer the export to a SD card. You're completly wright about that.

[Marinus van Deudekom]

@Peter-Zehentreiter There's alway more ways to get where you wanna go

[Mike wiruth]

@Marinus-van-Deudekom What do you mean by "use the connector"? What connector are you talking about?
Thanks,

[Peter Zehentreiter]

@Marinus-van-Deudekom sent you a PN

[John S Parry]

There are a few posts referencing SD card here. I'm not sure if some of the advice given is to use it to store routes on your XT, or not.

My advice is to use the SD card you place in the XT slot. Simply create a Garmin/GPX folder on the card and copy your GPX file directly into it. The XT will recognize it existence, import/recalculate it, and store it for execution. The advantage is that if your route ever gets corrupted, you can quickly re-import it from the SD card and be on your way. If you import into Garmin internal storage and corruption happens, you have to go back to MRA and perform the transfer process from scratch. Admittedly, this a rare occurrence, but the one time it happened to me was at the worst possible instance. As always, plan for the worst, but hope for the best.

In any case, a direct wired file copy (manually performed by you) from your PC/Mac to your Garmin is always the safest method. Anytime you use a transfer intermediary (Drive app, Tread app, MRA Connector), there is a possibility that the process can break. For reasons totally out of your control.