Automatic switch Distance to next Via Point / Final Destination
-
@Rajp I understand why you are requesting this because this is my most used function with my SilverFox Bluetooth controller.
@Nick-Carthew can you switch with the SilverFox between the displayed times?
Hardware
iPhone 12 pro (iOS 17.0.2)
Oukitel RT3 (Andr. 12)
Samsung Galaxy XCover 4 (Andr. 9 Pie)
Wireless CarPlay mit (Elebest C650)
Wired CarPlay (SEAT Arona - 2021)
For more information, click here -
@Nick-Carthew can you switch with the SilverFox between the displayed times?
@Jörgen Yes, as I said, it is my most used function.
Always willing to help if I can.
Triumph Tiger 1200 XRT called Tina.
MRA Navigation Next and SilverFox B8J bar buttons.
Quadlock wireless mount for IPhone 11.
Cardo Scala Packtalk Bold.
TomTom Rider 500. (In the cupboard now) -
@Jörgen Yes, as I said, it is my most used function.
@Nick-Carthew nice to switch this by remote controller Silverfox!
I would like to do this also by my remote controller. But I need still to wait until the connection type for Remote 2 controller from DMD (Thork Racing) has been developed for MyRoute-App
-
@Rajp I understand why you are requesting this because this is my most used function with my SilverFox Bluetooth controller.
@Nick-Carthew said in Automatic switch Distance to next Via Point / Final Destination:
this is my most used function with my SilverFox Bluetooth controller.
This is no default method is it? Did you remap buttons?
I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Streetpilot 2610/Zumo 660/Zumo 395/ CAT S52 + MRA app -
@Nick-Carthew said in Automatic switch Distance to next Via Point / Final Destination:
this is my most used function with my SilverFox Bluetooth controller.
This is no default method is it? Did you remap buttons?
@Con-Hennekens No re- map, it’s default.
-
Hello, I know there is an option to switch the duration and distance summary between the next via point or the final destination, but you need to enter the options to switch between one or the other.
Any chance we can add an “automatic” option in this setup?
The “Automatic” option would then switch to displaying the duration and distance to the next via point and final destination on a timed basis, say every 3 to 4 seconds. That way you could see the summaries without having to manually select and switch. Of course, if there are no via points then just show the final destination summary
@Rajp said in Automatic switch Distance to next Via Point / Final Destination:
The “Automatic” option would then switch to displaying the duration and distance to the next via point and final destination on a timed basis, say every 3 to 4 seconds. That way you could see the summaries without having to manually select and switch. Of course, if there are no via points then just show the final destination summary
I made this same suggestion many months ago, as Scenic does this and it’s brilliant. It allows you to gauge the remainder of the day without having to mess about pressing buttons etc.
It’s especially handy if leading a group, as someone inevitably asks over the intercom what time lunch is or if we’re on time for the end of day arrival.
-
@Nick-Carthew said in Automatic switch Distance to next Via Point / Final Destination:
this is my most used function with my SilverFox Bluetooth controller.
This is no default method is it? Did you remap buttons?
@Con-Hennekens said in Automatic switch Distance to next Via Point / Final Destination:
...This is no default method is it? Did you remap buttons?
Oh - how could be done a remap of remote controller buttons? I thought, only in settings, the correct remote controller must be selected.
Nothing is impossible ;-)
In past: GARMIN Zumo 210->GARMIN Zumo 395->GARMIN XT=> now: DMD T865-X + MyRoute-App, LocusMaps, OsmAnd.
In past: GARMIN MapSource ->GARMIN BaseCamp->Tyre->Kurviger->Calimoto=> now: MRA-Routplanner. -
@Con-Hennekens said in Automatic switch Distance to next Via Point / Final Destination:
...This is no default method is it? Did you remap buttons?
Oh - how could be done a remap of remote controller buttons? I thought, only in settings, the correct remote controller must be selected.
@Guzzist the controller (like the BarButtons) is sending letters (as you can type on a keyboard). For Android there is an App (sorry, forgot the name) where you can remap what the controller sends.
This is helpful for controller that do not send the Keys you need for MRA.
I do not know what key is needed to switch the display.@Nick, can you open an editor and push the button for the display change and let us know what letter is sent?
-
This is all listed in the manuals
Go to https://www.myrouteapp.com/support > "MyRoute-app" > "Bluetooth controllers".
For SilverFox, it's an "A"
-
As much as I understand some people's wish for this automatic switch, I just want to highlight also that it might draw eyes to the screen until your desired information comes along. It could be considered dangerous.
I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Streetpilot 2610/Zumo 660/Zumo 395/ CAT S52 + MRA app -
This is all listed in the manuals
Go to https://www.myrouteapp.com/support > "MyRoute-app" > "Bluetooth controllers".
For SilverFox, it's an "A"
@Corjan-Meijerink, I get it... there is no A in BarButtons
(they could if they gave up repetitive zooming by long press).I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Streetpilot 2610/Zumo 660/Zumo 395/ CAT S52 + MRA app -
As much as I understand some people's wish for this automatic switch, I just want to highlight also that it might draw eyes to the screen until your desired information comes along. It could be considered dangerous.
@Con-Hennekens alternate solution could be to tap that summary panel which then switches, tap again to switch back. So you can cycle through the various summary info by simply tapping that info summary panel.
-
@Con-Hennekens alternate solution could be to tap that summary panel which then switches, tap again to switch back. So you can cycle through the various summary info by simply tapping that info summary panel.
@Rajp I think this is a better idea.
Having the constant change show is too distracting for my liking.
And going to the menu every time to switch is also inconvenient.
The solution is indeed what @Raip suggests. Just click on the screen in the box to switch. -
@Corjan-Meijerink, I get it... there is no A in BarButtons
(they could if they gave up repetitive zooming by long press).@Con-Hennekens said in Automatic switch Distance to next Via Point / Final Destination:
@Corjan-Meijerink, I get it... there is no A in BarButtons
(they could if they gave up repetitive zooming by long press).Too bad. Do you know someone who can extend the BarButtons code?
I will ask a friend, but is not easy.
Hardware
iPhone 12 pro (iOS 17.0.2)
Oukitel RT3 (Andr. 12)
Samsung Galaxy XCover 4 (Andr. 9 Pie)
Wireless CarPlay mit (Elebest C650)
Wired CarPlay (SEAT Arona - 2021)
For more information, click here -
@Con-Hennekens alternate solution could be to tap that summary panel which then switches, tap again to switch back. So you can cycle through the various summary info by simply tapping that info summary panel.
@Rajp said in Automatic switch Distance to next Via Point / Final Destination:
@Con-Hennekens alternate solution could be to tap that summary panel which then switches, tap again to switch back. So you can cycle through the various summary info by simply tapping that info summary panel.
That's already the case long time...
I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Streetpilot 2610/Zumo 660/Zumo 395/ CAT S52 + MRA app -
@Con-Hennekens said in Automatic switch Distance to next Via Point / Final Destination:
@Corjan-Meijerink, I get it... there is no A in BarButtons
(they could if they gave up repetitive zooming by long press).Too bad. Do you know someone who can extend the BarButtons code?
I will ask a friend, but is not easy.
@Jörgen, yes, Joost, the developer of BarButtons...
But he has been very quiet for a long time already. -
@Rajp said in Automatic switch Distance to next Via Point / Final Destination:
@Con-Hennekens alternate solution could be to tap that summary panel which then switches, tap again to switch back. So you can cycle through the various summary info by simply tapping that info summary panel.
That's already the case long time...
@Con-Hennekens on the phone app yes, but not on CarPlay, sorry I was referring to CarPlay screen
-
This is all listed in the manuals
Go to https://www.myrouteapp.com/support > "MyRoute-app" > "Bluetooth controllers".
For SilverFox, it's an "A"
@Corjan-Meijerink said in Automatic switch Distance to next Via Point / Final Destination:
This is all listed in the manuals
Go to https://www.myrouteapp.com/support > "MyRoute-app" > "Bluetooth controllers".
For SilverFox, it's an "A"
Hello Corjan,
I tried this out and compared it with the information on the support page. I first realised that all letters have to be sent as a code in lower case and not in upper case as described. (for BarButtons N=n, D=d and C=c)
I can not check this for Silverfox, but I think it should also be written in lower case here.Assuming Joost (or someone else) changes the code and you could send an ‘a’ for the display switch, would you then add this function for BarButtons in MRA?
