Waypoint automatic renaming when moved

[Wallace Shackleton]

One suggestion would be to disable the automatic renaming of a waypoint if it is moved.
It is annoying to give a waypoint a special name only to have it automatically renamed if that waypoint is moved, say to slightly fine tune a route.
EG. If I create a names waypoint such as "Cumnock" moving it to fine tune a route changes it to "22 Mossmark, Cumnock, KA18 4NF, United Kingdom."

As an aside. One thing that I will have to get better at is not allowing waypoints with names like "22 Mossmark, Cumnock, KA18 4NF, United Kingdom" as it comes out in its entirety when the Garmin XT announces it as part of a route.

[Garry Davis]

@Wallace-Shackleton If I'm not wrong, when you've named your waypoint, and you need to move it slightly, when the new name comes up, just press cancel, and your original name stays the same as you put it in, in the first place, well mine does anyway.

[Guzzist]

@Garry-Davis you are right

[M. Schrijver]

This only happend when you have the option enabled. I've diabled that option. Then it will be renamed anyway.

You can find it under "Toolkit" almost at the bottom of the list.

[Con Hennekens]

@Wallace-Shackleton, Usually the name reflects an address. It is quite logical that the address changes along with the movement of the waypoint. However when you chose to give the waypoint a "sensible" name manually, it would be great if that name could be kept despite any movement.

[M. Schrijver]

That would be nice, indeed

[Wallace Shackleton]

Removing the tick against "Ask for waypoint Name" does work but it only does that. Moving the waypoint will automatically rename it.

Using Cancel is the best solution thanks for that but it is counter intuitive.
Who would ever think of selecting Cancel to retain the original waypoint name?

Thanks for the info but this needs to be addressed by the developers.

[RetiredWingMan]

@Wallace-Shackleton why? It works exactly as intended and the work around is simple.

[Nomko Nomden]

@Garry-Davis said in Waypoint automatic renaming when moved:

@Wallace-Shackleton If I'm not wrong, when you've named your waypoint, and you need to move it slightly, when the new name comes up, just press cancel, and your original name stays the same as you put it in, in the first place, well mine does anyway.

This does the trick! Just move the waypoint to a new location and instead of pressing Accept, press Cancel! The waypoint is moved to its new location and you keep the name/description you gave that waypoint.

[Con Hennekens]

@RetiredWingMan said in Waypoint automatic renaming when moved:

why? It works exactly as intended and the work around is simple.

Because with that workaround ANY movement triggers an extra click. I tend to move waypoints A LOT to find optimum placement. And only a few of the waypoints are interesting enough for a changed name. Having to click on cancel or accept is NOT what I would want. I'd rather copy the name before moving a waypoint to be able to paste it back after moving it, for the few waypoints for which this is a thing....

[Marinus van Deudekom]

@Con-Hennekens yes I agrée. For the most shapingpoints it’s no issue at all and for The viapoints I tend to copy the name before moving it