New Beta! (v4.1.0) Android Auto / CarPlay revamp
-
Nice work again (i think.... as i don't use Android Auto because it does not work with the Volvo XC40 recharge)_ and I agree on skipable intro
although I can not decide on your resource allocation, I must say:
As far as I am concerned: All available resourcing should go to the battery drain issues, before new features. The motorcycle season is upon us. And I think majority of users does not have an Android Auto or carplay addition. So i really hope that you and HERE can reduce the battery usage very soon.
I don't dare using the app when i am riding bicycle as I am concerned it will be depleted and I have no means of contact -
My update did also not start (Android 12 on Oukitel), before deleting all data of the App and login again.
Hardware
iPhone 12 pro (iOS 180.2)
Oukitel RT3 (Andr. 12)
Samsung XCover 4 (Andr. 9 Pie)
Wireless CarPlay mit (Elebest C650)
Wired CarPlay (SEAT Arona - 2021)
For more information, (Workshops) click here -
Does The MyRouteApp work the same on Android Auto / CarPlay as on the smartphone?
Sometimes I think that the dissatisfaction with the functionality of Android Auto / CarPlay is caused by the fact that it is unknown that not every functionality of MyRouteApp works the same in those environments.
Is the Manual MyRoute app still completely up to date so that the overview of its functions can be used and that it is also clear during testing in advance what does not work with Android Auto / CarPlay? -
My update did also not start (Android 12 on Oukitel), before deleting all data of the App and login again.
@Jörgen can you confirm which version you downloaded? We released a quick, minor update (263) that should have already solved it.
@richtea999 we’ll discuss the mandatory intro and the ability to skip it
@Edwin_M we are working hard with HERE but unfortunately they are the main cause so only so much we can do
-
@Jörgen can you confirm which version you downloaded? We released a quick, minor update (263) that should have already solved it.
@richtea999 we’ll discuss the mandatory intro and the ability to skip it
@Edwin_M we are working hard with HERE but unfortunately they are the main cause so only so much we can do
@Corjan-Meijerink Version 4.1.0 -262
Hardware
iPhone 12 pro (iOS 180.2)
Oukitel RT3 (Andr. 12)
Samsung XCover 4 (Andr. 9 Pie)
Wireless CarPlay mit (Elebest C650)
Wired CarPlay (SEAT Arona - 2021)
For more information, (Workshops) click here -
@Corjan-Meijerink Version 4.1.0 -262
Should I try to update that again?
Ok, 263 is not available for me yet.
Hardware
iPhone 12 pro (iOS 180.2)
Oukitel RT3 (Andr. 12)
Samsung XCover 4 (Andr. 9 Pie)
Wireless CarPlay mit (Elebest C650)
Wired CarPlay (SEAT Arona - 2021)
For more information, (Workshops) click here -
@Jörgen good to know!
263 is indeed still processing for Android but should be available shortly.
People updating directly to that version should not get the white screen. -
Good weekend everyone!
It has been exactly a month since our last beta update.
Now this beta is something we are looking forward to very much. This update is completely focussed on stability of the app itself and more specifically Android Auto / CarPlay.Since the release of the app it is possible to use AA / CP. However, the stability has never been like we wanted it to be
Over the last months, Joost has been working extremely hard to improve the stability of Android Auto and CarPlay 
There are some minor new features, such as the possibility to change some navigation preferences directly from AA / CP, but there aren't any major new features.
As said, the focus of this beta is stability. The app itself should perform better but above all the AA / CP connectivity and usability will be greatly improved compared to previous versions
What to test?
Simply use the app! If you don't have a car with AA / CP or don't use it, we still want to know how the app itself functions on your device. If you do use AA / CP, we are excited to learn if you indeed experience a major increase in stability.What's next?
Coming week we will be working together with HERE directly to see if the battery drain issue can be resolved forever. Together with that, we will make some more changes to improve the GPS positioning.Enjoy your weekend and please let us know your experience with the app!
At the time of writing this post, it is already available for Android. iOS will be available shortly and those users will get a notification from TestFlight.Thanks again for being part of the beta community
Best,
Corjan@Corjan-Meijerink and Joost thnx for the hard work you both did
Build 263 is availible as we speek. -
Good weekend everyone!
It has been exactly a month since our last beta update.
Now this beta is something we are looking forward to very much. This update is completely focussed on stability of the app itself and more specifically Android Auto / CarPlay.Since the release of the app it is possible to use AA / CP. However, the stability has never been like we wanted it to be
Over the last months, Joost has been working extremely hard to improve the stability of Android Auto and CarPlay There are some minor new features, such as the possibility to change some navigation preferences directly from AA / CP, but there aren't any major new features.
As said, the focus of this beta is stability. The app itself should perform better but above all the AA / CP connectivity and usability will be greatly improved compared to previous versions
What to test?
Simply use the app! If you don't have a car with AA / CP or don't use it, we still want to know how the app itself functions on your device. If you do use AA / CP, we are excited to learn if you indeed experience a major increase in stability.What's next?
Coming week we will be working together with HERE directly to see if the battery drain issue can be resolved forever. Together with that, we will make some more changes to improve the GPS positioning.Enjoy your weekend and please let us know your experience with the app!
At the time of writing this post, it is already available for Android. iOS will be available shortly and those users will get a notification from TestFlight.Thanks again for being part of the beta community
Best,
Corjan@Corjan-Meijerink Well done!
🏍️ Motorcycle: DMD-T665 + SilverFox controller
🚗 Car: iPhone 15 Pro with wireless Apple CarPlay -
@Corjan-Meijerink Well done!
I just updated to 262 on an Android OnePlus 6T and had no problems. As far as I can see, everything works fine on the smartphone. Did not yet test Android Auto.
-
After reading the first posts. I made my precautions.
Deleted the "old" app en installed the new one.First of all big complements to the developers. Version 4.10 performed a lot beter than 4.0.8 (read my other post).
I did a short testride with 4.10. I made a route of 40 km. Riding went well. Some strange GPS behaviour. But i suspect the main issue for this is my phone. I was in a car and the phone was a bit hidden. This not good for the GPS reception.
Besides this. MRA did what is suppose to do.
Auto skipping shaping points went well also.There is one thing i would like to mention as an issue.
As long as the phone was connected to Android Auto is was not possible to start a route loaded from MRA webplanner on the phone.
I could select one. I got the overview with the setting choices. But when i push "Navigate" the wheel keeps turning and turning. No route appears on the screen (both screens).
I tried a again but this time disconnected from Android Auto. The route showed on my screen. After this i connect to Android Auto and worked well as said in the first part of this post.I tried it a few times and every the same result.
(I use MRA Next only on Android Auto. Every comment, suggestion, etc will be based on my usage with Android Auto)
-
I made sure to download the 263 version before starting the app. I still got the white screen. Clearing data and going through setup again fixed it.
2010 GL1800 Goldwing using Samsung Galaxy S20 5G Android 13.
-
I made sure to download the 263 version before starting the app. I still got the white screen. Clearing data and going through setup again fixed it.
@RetiredWingMan thanks for letting us know. We should now be able to see exactly what went wrong.
-
After reading the first posts. I made my precautions.
Deleted the "old" app en installed the new one.First of all big complements to the developers. Version 4.10 performed a lot beter than 4.0.8 (read my other post).
I did a short testride with 4.10. I made a route of 40 km. Riding went well. Some strange GPS behaviour. But i suspect the main issue for this is my phone. I was in a car and the phone was a bit hidden. This not good for the GPS reception.
Besides this. MRA did what is suppose to do.
Auto skipping shaping points went well also.There is one thing i would like to mention as an issue.
As long as the phone was connected to Android Auto is was not possible to start a route loaded from MRA webplanner on the phone.
I could select one. I got the overview with the setting choices. But when i push "Navigate" the wheel keeps turning and turning. No route appears on the screen (both screens).
I tried a again but this time disconnected from Android Auto. The route showed on my screen. After this i connect to Android Auto and worked well as said in the first part of this post.I tried it a few times and every the same result.
@M-Schrijver happy to hear that you are happy with the progress! We really put in a lot of effort to improve the stability.
Regarding the issue you encountered, we will check this out!
-
@RetiredWingMan thanks for letting us know. We should now be able to see exactly what went wrong.
@Corjan-Meijerink sorry, j was just checking all my options and noticed that the version is 262! I thought 263 was available but I guess not yet.
-
@RetiredWingMan thanks for letting us know. We should now be able to see exactly what went wrong.
@Corjan-Meijerink I did another update and 263 was loaded. Must have required two updates. The 263 update was much smaller.
-
Update from 262 to 263 went as usually. Connection to the account still there.
-
Good weekend everyone!
It has been exactly a month since our last beta update.
Now this beta is something we are looking forward to very much. This update is completely focussed on stability of the app itself and more specifically Android Auto / CarPlay.Since the release of the app it is possible to use AA / CP. However, the stability has never been like we wanted it to be
Over the last months, Joost has been working extremely hard to improve the stability of Android Auto and CarPlay There are some minor new features, such as the possibility to change some navigation preferences directly from AA / CP, but there aren't any major new features.
As said, the focus of this beta is stability. The app itself should perform better but above all the AA / CP connectivity and usability will be greatly improved compared to previous versions
What to test?
Simply use the app! If you don't have a car with AA / CP or don't use it, we still want to know how the app itself functions on your device. If you do use AA / CP, we are excited to learn if you indeed experience a major increase in stability.What's next?
Coming week we will be working together with HERE directly to see if the battery drain issue can be resolved forever. Together with that, we will make some more changes to improve the GPS positioning.Enjoy your weekend and please let us know your experience with the app!
At the time of writing this post, it is already available for Android. iOS will be available shortly and those users will get a notification from TestFlight.Thanks again for being part of the beta community
Best,
Corjan@Corjan-Meijerink
My App won't load after the update. Me too. Is the suggested app delete and reload the actual correct procedure to resolve this? Gary ClarkGary Clark
2018 R1200RS and 2001 MX-5 Miata
iPhone 15 iOS current. Wireless Carplay
IBA, MOA, Buckeye Miata Club
Dublin, Ohio USA -
@Corjan-Meijerink
My App won't load after the update. Me too. Is the suggested app delete and reload the actual correct procedure to resolve this? Gary ClarkiOS also a blanc screen after update. Delete the app and reinstall
Garmin Zumo XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
iOS also a blanc screen after update. Delete the app and reinstall
@Hans-van-de-Ven-MRA-Master
Deleted App and reInstalled. That worked. Thanks
Gary
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
undefined
