Using Connector to export routes to Zumo XT but does not show in Trip Planner
-
Or create the collection in Explore and make it visible in the XR and Explore
@Hans-van-de-Ven-MRA-Master
I have found that without the Zumo XT hooked up, when I use the connector to export, it says "Completed" The route is exported to your device. Enjoy!
Prior to this challenge, if the Zumo was not fully 'synched' to the computer, I would get an error message indicating the device could not be found.Did install the latest windows update - which had no effect on the problem
2023-09 Cumulative Update Preview for Windows 11 Version 22H2 for x64-based Systems (KB5030310)Thoughts?
-
@Hans-van-de-Ven-MRA-Master
I have found that without the Zumo XT hooked up, when I use the connector to export, it says "Completed" The route is exported to your device. Enjoy!
Prior to this challenge, if the Zumo was not fully 'synched' to the computer, I would get an error message indicating the device could not be found.Did install the latest windows update - which had no effect on the problem
2023-09 Cumulative Update Preview for Windows 11 Version 22H2 for x64-based Systems (KB5030310)Thoughts?
You have to wait until you see the xt on your PC before you use the connector
I mostly use my windows 10 desktop, I will check this on my windows 11 laptop.Garmin Zumo XT3/XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)/...
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
You have to wait until you see the xt on your PC before you use the connector
I mostly use my windows 10 desktop, I will check this on my windows 11 laptop.@Hans-van-de-Ven-MRA-Master
Good morning - please try to use the connector w/o a device hooked up and see if you get an error message indicating there is no device.
Without any device hooked up, the connector indicates the file transferred.
I can see and use the Zumo from Windows (11) Explorer and I can download and copy the files to my SD card - just can't transfer via connector.
I have done a repair to myroute app w/o change. Tried both Chrome and Edge with the same results. -
@Hans-van-de-Ven-MRA-Master
Good morning - please try to use the connector w/o a device hooked up and see if you get an error message indicating there is no device.
Without any device hooked up, the connector indicates the file transferred.
I can see and use the Zumo from Windows (11) Explorer and I can download and copy the files to my SD card - just can't transfer via connector.
I have done a repair to myroute app w/o change. Tried both Chrome and Edge with the same results.@BD-1
Just transferred a route to the XT using the Windows 11 laptop.
No problems encountered, the route is neatly placed on the device in the GPX folder, after which I can import the route.
If no device is connected to the laptop, I get the message that the device cannot be found.So on this side everything works as it should.
Garmin Zumo XT3/XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)/...
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
@BD-1
Just transferred a route to the XT using the Windows 11 laptop.
No problems encountered, the route is neatly placed on the device in the GPX folder, after which I can import the route.
If no device is connected to the laptop, I get the message that the device cannot be found.So on this side everything works as it should.
@Hans-van-de-Ven-MRA-Master
Can we switch sides?
-
@BD-1
Morning Hans - issues is resolved!I had a SanDisk Ultra USB plugged in at the same time my Zumo XT was plugged in. Removing the SanDisk allowed the connector app to seek out the Zumo as intended. Removing both the USB and Zumo and using the connector app gave me the error message there is no device.
When the USB and Zumo are connected to the PC, the connector app is sending the file to the Garmin folder on the USB only.Appreciate your kind assistance in trying to solve my problem - appears to have been 'self inflicted' !
Best regards,
BD
-
Always place the points on the route line, zoom in as much as possible.
Garmin Zumo XT3/XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)/...
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
Always place the points on the route line, zoom in as much as possible.
I had the same issue with transferring routes from MRA Routeplanner to GARMIN XT. But since I
- Listenpunkt use HERE maps to plan the route in MRA Routeplanner,
- Listenpunkt check in very close detail if all way points are placed exactly on roads,
- Listenpunkt export it as gpx 1.1 (not gox 1.2)
issues are gone! The GARMIN XT doesn't work well with imported gpx 1.2 out of MRA Routeplanner. You may use this format only with XT2 device.
Nothing is impossible ;-)
In past: GARMIN Zumo 210->GARMIN Zumo 395->GARMIN XT=> now: DMD T865-X + MyRoute-App, LocusMaps, OsmAnd.
In past: GARMIN MapSource ->GARMIN BaseCamp->Tyre->Kurviger->Calimoto=> now: MRA-Routplanner. -
I had the same issue with transferring routes from MRA Routeplanner to GARMIN XT. But since I
- Listenpunkt use HERE maps to plan the route in MRA Routeplanner,
- Listenpunkt check in very close detail if all way points are placed exactly on roads,
- Listenpunkt export it as gpx 1.1 (not gox 1.2)
issues are gone! The GARMIN XT doesn't work well with imported gpx 1.2 out of MRA Routeplanner. You may use this format only with XT2 device.
The gpx 1.2 works also perfect in the XT, used that format always
Garmin Zumo XT3/XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)/...
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
The gpx 1.2 works also perfect in the XT, used that format always
@Hans-van-de-Ven-MR-MRA said in Using Connector to export routes to Zumo XT but does not show in Trip Planner:
The gpx 1.2 works also perfect in the XT, used that format always
@Hans-van-de-Ven-MR-MRA you may right. But I had issues with a never updated XT. Now I can't compare any longer, because I don't have the XT any more.
Nothing is impossible ;-)
In past: GARMIN Zumo 210->GARMIN Zumo 395->GARMIN XT=> now: DMD T865-X + MyRoute-App, LocusMaps, OsmAnd.
In past: GARMIN MapSource ->GARMIN BaseCamp->Tyre->Kurviger->Calimoto=> now: MRA-Routplanner. -
@Hans-van-de-Ven-MR-MRA said in Using Connector to export routes to Zumo XT but does not show in Trip Planner:
The gpx 1.2 works also perfect in the XT, used that format always
@Hans-van-de-Ven-MR-MRA you may right. But I had issues with a never updated XT. Now I can't compare any longer, because I don't have the XT any more.
@Guzzist I'm sure that the 1.2 export works good on an XT done it a lot of times
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
-
012139
-
09112
-
18166
-
38184
-
06107
-
06103
-
0559
-
1481
