Route navigation a mess after latest update
-
Thanks for your comment.
The reason why I started the navigation again was because of all the strange commands I got otherwise I would not have done that.
AND when I restarted the navigation I had the function "start from current location" enabled.
So the question is why I got all these strange commands which wanted to redirect me from my route in the first place, before restarting the navigation?
@Thomas-Scharrer said in Route navigation a mess after latest update:
"start from current location"
This option determines whether you want route instructions from your current position to waypoint 1, or if you want the route instructions to start only from waypoint 1.BMW K1600GT-P (2013) with BMW Navigator | Nolan N100-5 with Sena 30K
iOS on iPhone 13 (mounted on Quadlock)
Apple CarPlay in VW T-Roc (wired)
Routelab on MacBook Air & iMac (Sequoia & Monterey) -
@Thomas-Scharrer said in Route navigation a mess after latest update:
"start from current location"
This option determines whether you want route instructions from your current position to waypoint 1, or if you want the route instructions to start only from waypoint 1.that is even more unlogic.
If you are already somewhere on a route, why should the navigation guide you back to waypoint 1 and not to the next one to come?
Other navigation systems would resume navigation from your current position onwards not back.Imagine if you are on a tour for several days and you stop the navigation in between instead of keeping it running over night it will not work at all?
To avoid having the navigation running all the time on such tours, I always split several day tour into 1 day tours but that is a workaround.
-
that is even more unlogic.
If you are already somewhere on a route, why should the navigation guide you back to waypoint 1 and not to the next one to come?
Other navigation systems would resume navigation from your current position onwards not back.Imagine if you are on a tour for several days and you stop the navigation in between instead of keeping it running over night it will not work at all?
To avoid having the navigation running all the time on such tours, I always split several day tour into 1 day tours but that is a workaround.
@Thomas-Scharrer Just wait for the next update when the earlier mentioned function will be released!
that is even more unlogic.
I think I need to correct myself
. This function only shows the driving time of your entire route starting from waypoint 1. If you turn the toggle on (green), you will see the driving time of the route including the navigation from your current departure point. If the toggle is red, you will only see the driving time from waypoint 1. In both cases, you will be guided with route instructions.So, it's more or less a planning thing...
-
Fortunately I am also using a Beeline navigation device which provides very reliable navigation.
I am often exporting my created routes to the Beeline.
With the Beeline, if I stop a navigation and start it again, it will always start the route from my current position and navigate me further, not back.
Please also note that it is no problem at all for Beeline to have my address as start and end point.Is the conclusion here now that nothing is wrong with the MRA navigation and it is just my fault because I used my home address as start and end point (which is not possible anymore) and that I have not added enough waypoints?
-
that is even more unlogic.
If you are already somewhere on a route, why should the navigation guide you back to waypoint 1 and not to the next one to come?
Other navigation systems would resume navigation from your current position onwards not back.Imagine if you are on a tour for several days and you stop the navigation in between instead of keeping it running over night it will not work at all?
To avoid having the navigation running all the time on such tours, I always split several day tour into 1 day tours but that is a workaround.
@Thomas-Scharrer said in Route navigation a mess after latest update:
If you are already somewhere on a route, why should the navigation guide you back to waypoint 1 and not to the next one to come?
Well, imagine you're not at the start location but somewhere else but I do wanna start at rp1..(!) How should the app determine whether or not I do want to ride the entire route, and not only the 'remaining' part from my current location.
Imho it truly makes sense for the app to always start at rp1, and the user shall deviate from that method on purpose by manual interaction by i.e. longpressing the closest waypoint. Note that a new function will be implemented to auto-start from the nearest waypoint in upcoming updates.
And to be clear: the app has had this behavior since it's first beta release, and it has even been like this in the previous app! It has always defaulted to start at rp1. You expecting the app to start at the nearest waypoint while on route, proves to me you're now very familiar with the nav app yet, I'm sorry. I'm therefore inclined to say some user error is in play here. No judgment, just observation.
-
Fortunately I am also using a Beeline navigation device which provides very reliable navigation.
I am often exporting my created routes to the Beeline.
With the Beeline, if I stop a navigation and start it again, it will always start the route from my current position and navigate me further, not back.
Please also note that it is no problem at all for Beeline to have my address as start and end point.Is the conclusion here now that nothing is wrong with the MRA navigation and it is just my fault because I used my home address as start and end point (which is not possible anymore) and that I have not added enough waypoints?
@Thomas-Scharrer said in Route navigation a mess after latest update:
With the Beeline, if I stop a navigation and start it again, it will always start the route from my current position and navigate me further, not back.
If you stop the navigation you get a very clear message on your homescreen: "Resume navigation?". Pressing "Yes/Navigate" completely does what you mention here! You seem to simply not know the app. That's fine, but before posting things like: "this app is completely useless", please ask questions first to check whether or not it's the app's fault or users's fault.
Manks bu'j te bange.
-
@Thomas-Scharrer said in Route navigation a mess after latest update:
With the Beeline, if I stop a navigation and start it again, it will always start the route from my current position and navigate me further, not back.
If you stop the navigation you get a very clear message on your homescreen: "Resume navigation?". Pressing "Yes/Navigate" completely does what you mention here! You seem to simply not know the app. That's fine, but before posting things like: "this app is completely useless", please ask questions first to check whether or not it's the app's fault or users's fault.
@Stefan-Hummelink
I have used the MRA navigation app a lot this summer and as mentioned it worked well (for me for the first time) in this period before the last update, that is just my observation.Maybe its stupid or my way of thinking is unlogic to you but if I am somewhere (not only planned route) and then I enter from somewhere my planned route (this can also be a gas station or restaurant not on the route) I would think it would be logic that the navigation then navigates me from that point further. However MRA seems to try to find whatever alternative routes by itself to navigate me home.
During all the tours I rode this summer there were a few hickups with the navigation but nothing serious, meaning it worked well. But on my last tour after the update I suddenly got 100 strange commands away from my planned route so it was really impossible to navigate and therefore I assumed something has happened during this update because it clearly wasnt like that before even though I also used before my home address as start and end point.
Please also note that I am using MRA on a motor bike. I understand that when you use it in the car you can constantly fickle around with waypoints etc but this is not possible when riding motorbike, it would be far from safe.
So why did I get during this tour all these strange commands .... according to you because I dont know the system?
-
@Thomas-Scharrer said in Route navigation a mess after latest update:
With the Beeline, if I stop a navigation and start it again, it will always start the route from my current position and navigate me further, not back.
If you stop the navigation you get a very clear message on your homescreen: "Resume navigation?". Pressing "Yes/Navigate" completely does what you mention here! You seem to simply not know the app. That's fine, but before posting things like: "this app is completely useless", please ask questions first to check whether or not it's the app's fault or users's fault.
And as mentioned above I only stopped the navigation and restarted it BECAUSE of all the hopeless commands I got ...... so I thought maybe a restart of the navigation would help. So dont tell me this is my fault because I restarted the navigation.
-
@Stefan-Hummelink
I have used the MRA navigation app a lot this summer and as mentioned it worked well (for me for the first time) in this period before the last update, that is just my observation.Maybe its stupid or my way of thinking is unlogic to you but if I am somewhere (not only planned route) and then I enter from somewhere my planned route (this can also be a gas station or restaurant not on the route) I would think it would be logic that the navigation then navigates me from that point further. However MRA seems to try to find whatever alternative routes by itself to navigate me home.
During all the tours I rode this summer there were a few hickups with the navigation but nothing serious, meaning it worked well. But on my last tour after the update I suddenly got 100 strange commands away from my planned route so it was really impossible to navigate and therefore I assumed something has happened during this update because it clearly wasnt like that before even though I also used before my home address as start and end point.
Please also note that I am using MRA on a motor bike. I understand that when you use it in the car you can constantly fickle around with waypoints etc but this is not possible when riding motorbike, it would be far from safe.
So why did I get during this tour all these strange commands .... according to you because I dont know the system?
@Thomas-Scharrer said in Route navigation a mess after latest update:
Please also note that I am using MRA on a motor bike
Please take a look at my profile picture...
-
@Stefan-Hummelink
I have used the MRA navigation app a lot this summer and as mentioned it worked well (for me for the first time) in this period before the last update, that is just my observation.Maybe its stupid or my way of thinking is unlogic to you but if I am somewhere (not only planned route) and then I enter from somewhere my planned route (this can also be a gas station or restaurant not on the route) I would think it would be logic that the navigation then navigates me from that point further. However MRA seems to try to find whatever alternative routes by itself to navigate me home.
During all the tours I rode this summer there were a few hickups with the navigation but nothing serious, meaning it worked well. But on my last tour after the update I suddenly got 100 strange commands away from my planned route so it was really impossible to navigate and therefore I assumed something has happened during this update because it clearly wasnt like that before even though I also used before my home address as start and end point.
Please also note that I am using MRA on a motor bike. I understand that when you use it in the car you can constantly fickle around with waypoints etc but this is not possible when riding motorbike, it would be far from safe.
So why did I get during this tour all these strange commands .... according to you because I dont know the system?
@Thomas-Scharrer said in Route navigation a mess after latest update:
So why did I get during this tour all these strange commands .... according to you because I dont know the system?
Perhaps you've missed waypoint 1? All kinds of reasons, but the most basic foundations of the apps behaviour seem unknown to you, that's the only thing I observe. That is completely fine as long as no statements like: "This app is completely useless" are made.
I have been using the app very much without any issues, as long as the app is used how it is intended to be used for routes that are fitting to the way the routes should be made for correct use with the app.
That being said, I'm sorry for mentioning you don't know the app, but seriously, getting 100 strange commands does not match the behaviour I, and many others, have observed, so the obvious thing is to look in the mirror and try to filter out user error, before pointing to the app.
-
@Peter-Schiefer
thanks for the information -
Thanks guys, I've learned some things here ;-).
