BMW Connected Ride Navigator not importing waypoints

[Topcat502]

A further update to this
We've now done a ride where we have converted to waypoints through the Connected Ride App and then used the CRN to navigate. It doesn't recognise the difference between a destination and a waypoint, as the navigation display shows ETA for the next waypoint and the destination as the same. It also removes the waypoint from the route on the map as you go along. It doesn't alert you to the name of the waypoint either, it just tells you (sometimes) that you have reached your destination.

[Jez 0]

@Hans-van-de-Ven-MR-MRA

Hi just started withn this ConnectedRide Navigator.

Question 1) Do i have to use TOMTOM Maps as default to export the GPX 1.1 file so it's recognised accurately in Navigator or does it not matter?

I have created both the track and Route files to test with HERE Maps and the TOMTOM Maps- not sure what is going to work here.

Question 2) Should i just create the Routes with the maximum 50 Shaping points and use that in GPX 1.1 format? either TOMTOM or HERE Maps (what works)?

Question 3) I preume if a track is too large it just can't handle it. Had a error when testing.

Hope they update so we can see the detail of way points, as that's most dissapointing.

Regards

Jez

[Hans van de Ven MR.MRA]

@Jez-0

Hello

1. Yes, it is best to use the TomTom card, because the CRN also uses the TomTom card. And the GPX 1.1 file also gives the best result and you can make the Shaping points visible in the connected app and therefore also on the CRN. There are no formation points in a GPX 1.2.

2. You can create more than 50 Shaping points, only the connected app can make a maximum of 50 visible.

3. If you have more than 50 Shaping points in your route, take the track, this is the file with more than 3000 support points.

[Jez 0]

@Hans-van-de-Ven-MR-MRA

Many thanks i will try that.

Do you think we will eventually be able to obtain the information as per way points in MRA Navigation. Or at least some way to communicate the notes for each way point like Fuel - Coffee stop etc.

Regards

Jez

[Hans van de Ven MR.MRA]

@Jez-0

No, I don't think so, because TomTom has to change this

[Jez 0]

@Hans-van-de-Ven-MR-MRA

Hi,

On another note when we look at routes could you add a field so we can see what mapping we used to create; either TOMTOM or HERE Maps.

Save me having to open all the routes.

[Hans van de Ven MR.MRA]

@Jez-0

When you create a route you can choose the map

[Jez 0]

@Hans-van-de-Ven-MR-MRA

Hi,

Yes i know that - but if i am planning for TOMTOM or HERE Maps it be good to see what system i used in the information. Maybe we could add other details like avoidances used and if road closures are ignored etc.

Only other way but without all that detail would be to create seperate folders fot HERE and TOMTOM but missing the information in that box that would be nice.

Regards

Jez

[Kenneth de Miranda]

@Hans-van-de-Ven-MR-MRA yes correct. I just uploaded a topic on the same issue, did not know you had already posted this here. Is the 50 points a Tom Tom limit or is it just the Connected Ride app the limiting factor?

[Jez 0]

@Kenneth-de-Miranda

Maybe BMW should have collaborated with MRA - i have now had some correspondence with them with a list of improvements that could be made.

Only option at present is possibly the Carpe Iter. Then I can use MRA for Navigation and the Tablet allows far greater use.