Update 4.0.3 - Motorhome / motorcycle support and much more!
-
I agree with you.
On my Samsung S21+ you can manually set the Screen Brightness.
I have been using 50% from day 1 of the Beta.
@Lynchy67, at daylight I use full brightness, but that depends largely on your device. But when it's dark it could easily be reduced by half. So if you usually drive on 80%, at night it could be reduced by 50% to 40%.
-
@Corjan-Meijerink, I hate dark maps, because they lack detail and contrast. Of course I can disable that, but I was thinking that auto reducing the screen brightness by 50% would make a nice addition to this setting. What do you think? Better for energy too...
@Con-Hennekens might be an option for later. Screen brightness will already be automatically reduced by the OS based on ambient light.
-
@Con-Hennekens might be an option for later. Screen brightness will already be automatically reduced by the OS based on ambient light.
@Corjan-Meijerink, you are right, but that usually works very bad... Also it seems to cause battery drain to use that feature, plus it is really annoying that your brightness constantly changes while riding corners
-
@Corjan-Meijerink with the 209 version, when I open a route from the Routes menu,I can change the travel mode. This is a great function. However, when I changed it and go back to the Routes menu, the icon that shows the travel mode has not been changed. When I go to the chart and open the Routes menu again, then I see that is has been changed. I think the problem is that the Routes menu is not refreshed when you go back to the Routes menu after changing the travel mode. Please have a look. Thanks.
-
@Corjan-Meijerink with the 209 version, when I open a route from the Routes menu,I can change the travel mode. This is a great function. However, when I changed it and go back to the Routes menu, the icon that shows the travel mode has not been changed. When I go to the chart and open the Routes menu again, then I see that is has been changed. I think the problem is that the Routes menu is not refreshed when you go back to the Routes menu after changing the travel mode. Please have a look. Thanks.
@Arno-0, That indeed looks to be the case, I noticed this too. However I am not so happy with this otherwise great feature to override the setting as made in the planner. It is great that you can set a car route to motorcycle route if you picked your bike this time. But a route planned as car route should in my opinion be kept a car route in the online platform, until that gets changed in a planner function. Much like changing the avoid highway option does that only for the current drive, and not permanently in the online platform.
I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Check out RideSleepRepeat.eu, a biker community for sharing stays across Europe
-
@Arno-0, That indeed looks to be the case, I noticed this too. However I am not so happy with this otherwise great feature to override the setting as made in the planner. It is great that you can set a car route to motorcycle route if you picked your bike this time. But a route planned as car route should in my opinion be kept a car route in the online platform, until that gets changed in a planner function. Much like changing the avoid highway option does that only for the current drive, and not permanently in the online platform.
In my case I have only ever ridden motorcycles with MRA so it’s no brainier for me.
My OCD dictates that I must have the Helmet Icon on all my routes.
-
@Corjan-Meijerink with the 209 version, when I open a route from the Routes menu,I can change the travel mode. This is a great function. However, when I changed it and go back to the Routes menu, the icon that shows the travel mode has not been changed. When I go to the chart and open the Routes menu again, then I see that is has been changed. I think the problem is that the Routes menu is not refreshed when you go back to the Routes menu after changing the travel mode. Please have a look. Thanks.
@Arno-0 you are very much correct!
This will be fixed in a later, future update. -
Update 4.0.3 is live on all platforms now
-
If I edit my profile I have to enter Camper dimensions to save. Even if I do not have a camper..
@Bert-3e elders gelezen dat dit morgen zou zijn opgelost...
🏍️ BMW K1600GT-P (2013) | Nolan N100-5 with Sena 30K
📱 iOS on iPhone 13 & 16 (mounted on Quadlock or AliExpress extention on BMW-cradle)
🚙 Apple CarPlay in VW T-Roc
💻 Routelab on MacBook Air & iMac (Tahoe & Ventura) -
@Bert-3e elders gelezen dat dit morgen zou zijn opgelost...
-
@Rob-Verhoeff Top! nog 3 uurtjes wachten
Het onmogelijke doen de dev's vrijwel meteen. Wonderen duren altijd eventjes.
Hier het topic: https://forum.myrouteapp.com/topic/5221/account-profil-change-without-motor-home
-
Corjan Meijerink referenced this topic on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login-
0580
-
0449
-
17299
-
013401
-
0251
-
59537
-
-
2146.1k
