Export 1.2 gpx

[Hans van de Ven MR.MRA]

@Henrik-Müller

The flags are the viapoints and they are called by your XT, the small dots are shapingpoints and they where only visible in the XT

[Hans van de Ven MR.MRA]

@Henrik-Müller

You can create your route as usual, with shaping and viapoints, only the viapoints are visible on the XT.
You can see it as a track with viapoints , but the shapingpoints shape the route.

[Steve Lynch]

@Hans-van-de-Ven-MRA-Master

I have to agree with all the other users who are saying that we want to actually see the shaping points (Blue Dots) on the XT map.
As we could on the XT with the previous Beta version.
My personal preference is to never use Via Points.
When I create a new route I don’t know at what point I might need a coffee or at what point in time I am going to get hungry.
I like to make those decisions whilst actually riding the route.
What do i do if I want to skip part of the of the route for some reason?
If we can’t see the shaping points how can we skip them?

[Hans van de Ven MR.MRA]

@Steve-Lynch
Hi @Steve,

If you never use waypoints in your route, you can simply use the track gpx 1.1 (Track and POI) or the track sent with the gpx 1.2 and have your Navigati convert it into a journey. Make the track visible and, if you want to skip a part of the route, you can drive back to the planned route.
The formation points are no longer visible and have already been skipped automatically.

[Steve Lynch]

@Hans-van-de-Ven-MRA-Master

Hi Hans

Just for clarity it is just Via Points that I never use for the reasons stated above.
I can still get my shaping points visible by using the 1.0 export and selecting the convert option as below.

[Dave J 0]

@Hans-van-de-Ven-MRA-Master I think you are missing the point that we liked how the beta version worked and the change with the released version is not what we expected. Why can we not have back the previous beta export functionality (blue dots on my XT as well as via/waypoints)? You may not agree but a lot of us liked having these exported and visible for our own different reasons and different nav use.

[Hans van de Ven MR.MRA]

@Dave-J-0
Hi @Dave,

I understand the question about the formation points, but the choice to change the gpx 1.1 (Beta) is that it can now be used for all Zumo devices with the NTU card (XT, 590, 346, BMW Navigator 6), and there is no need to create a separate gpx file for each Zumo.
You can only put 29 waypoints in a route today without the Zumo splitting them.
What do you use the formation points for if I may ask Dave?

[Hans van de Ven MR.MRA]

@Dave-J-0
Hi Dave,

If you use / import route from the gpx 1.0 and gpx 1.1 into your Zumo, all formation points are seen as waypoints, therefore you will get the message that the route is being split.
The advice was always to use the Track. With the release of the XT, the Beta version of the gpx 1.1 was used to test whether
the via points could be worked. So the waypoints only worked on the XT, but not on the older Zumos because all formation points were seen as waypoints, and you don't want that either. How Garmin handles this is Garmin's secret and they won't reveal it.

I will submit the request for Beta version for the XT to MRA.

[Dave J 0]

@Hans-van-de-Ven-MRA-Master I use via/flag points as definite stops that I must get too for facilities and RV. The formation/shaping allows me to see the points that I had planned to ‘go through’ but I can skip one or more of these on the device if I need/want with the device then recalculating to the next formation point - I can also see the points on the map overview if I am looking on how many I need/want to skip. Having just a track showing in the background means I have to manually route back to the track further along with the device trying to route me back to the original track and/or next via (not sure as I have not tried live yet). I do have the track on in the background as a safeguard against strange routing calculation that devices can do ‘on the day’ but, for me, a whole level of functionality has been removed by not having the formation/shaping points included in the ‘trip’. I am aware that there is a limit to via/waypoints on Zumo but you can have a large number of formation/shaping points between these via points. I have also had a TomTom previously where track was king but the Zumo works differently and it took me a while to get used to this different approach but I now like it. I hope this all makes sense.

I understand that you want a common export for Zumo models but this change from the beta is forcing me to use my device in a backward step way. I am somewhat disappointed with what was released from what I had come to expect from the beta. MRA was my Basecamp(yuk) alternative and it worked well, please find a way to re-implement what we had in the beta.

[Steve Lynch]

@Hans-van-de-Ven-MRA-Master said in Export 1.2 gpx:

I will submit the request for Beta version for the XT to MRA.

Thank you Hans.

[Reinhard-32]

Today I have tested the new GPX 1.2 format with my ZumoXT. If you use this format, the newcalculation must swiched off. Otherwise the route will be destroyed.
I have created a route only with shaping point ( points without alarm). After the import into my ZumoXT via Garmin Drive app the route was exactly the same as planned in MRA. Everything looks good. Then I forces the ZumoXT to a new calculation. This ends up with a route from start to destination. In my case from home start to home. The route was only 100 m long.
When I use a route in the older beta formart then a new calculation follows the shaping points.
Conclusion: MRA shold use the shapingpoints in the GPX 1.2 format.

[Hans van de Ven MR.MRA]

@Reinhard-32

Thanks for the reply. If you don't use via-points (point with alarm) then it is better to use the track.

[Hans van de Ven MR.MRA]

Hi all,

From the developers, if you don't use via-points, you can use the gpx 1.1 file.
I did a small test with a route, starting from home to the first point of the route, with recalculation ON.
The route is NOT distroyed, see pictures below: (tack is black in the background)

Route exported as Garmin Zumo gpx 1.1, all the shaping points are there.

The route in my XT.

The route, recalculated from my home to the first point on the route:

Only the via-points are not in this file,
Special for the users who want via-points (places where you will sop or drive by) is the Garmin Zumo gpx 1.2 file
The gpx 1.2 is basicly an Unflagged route

Hope this wil help?

[Hans van de Ven MR.MRA]

Hi all, test in the Zumo 346 gpx 1.1

The route with shaping points:

Route as picture:

Option to start the route, DO NOT CHOOSE THE END POINT!, because you wil be directed to the end point.

Choose the starting point of the route!

Directed to the startpoint and the route is not destroyed.

[Hans van de Ven MR.MRA]

Hi all, test in de BMW Navigator 6 with the gpx 1.1 file

Route with shaping points:

Route as picture

Start option, choose the start location

route = OK

Directed to the start location and route is not destroyed.

[Hans van de Ven MR.MRA]

Hi all, test in the Zumo 660 with the gpx 1.0 and 1.1 file (same results)

The 660 creates .bmp files, unfortunally this fileformat is not supported on the forum.

The 660 shows all shaping points as via-points (flags)
First drive to the starting point before you start the route, otherwise the route wil be destroyed.

[Stefan Trucksäß]

@Hans-van-de-Ven-MRA-Master

I created a new route for testing and testet it last Sunday.

The good news: the route works. But shaping points are not displayed but they are existing. The defined route with all detours shows it.

Unfortunately there are a few points to criticise:

The import in the navigator, - i.e. the time the navigator needs to import the route - is veeeeery slow. A route with 8 viapoints and 29 shaping points needed more than 6 minutes. With Beta 1.2, such a route needed about 30 seconds. ????

Shaping points are not displayed after the import. Neither in the map nor in the list. If I have to make a change in the navigator on the way (e.g. when a street is blocked), how can I change a shaping point into a via point? I can't. I can change a via point into a shaping point in the navigator. The shaping point then will be displayed. The recalculation now takes a few seconds.

The export (Save as) with GPX 1.2 works. In other programmes like Tyre or ITN converter only via points are imported, in kuviger.de via and shaping points. After copying a GPX-file edited by kuviger.de into the Navigator, only Viapoints are displayed again.

Despite all the joy that GPX 1.2 finally works on the Navigator, the lack of shaping points is a clear step backwards. I can only agree: please bring back the shaping points.

[Hans van de Ven MR.MRA]

@Stefan-Trucksäß

Hallo Stefan,
Lesen Sie sorgfältig, das gpx 1.1 hat sowohl Formation als auch Wegpunkte. Funktioniert nur bei Zumos mit NTU-Karte, also auch beim Navigator 6. An der Langsamkeit des Imports können wir nichts ändern, es hängt vom Gerät ab, wie schnell es die Daten verarbeiten kann.

[Stefan Trucksäß]

@Hans-van-de-Ven-MRA-Master
Hello Hans,

GPX 1.1 can transmit shaping points and via points, Obviously. However, when importing GPX 1.1, only shaping points are transferred. I have to change the shaping points into via points manually. Why should I do this when GPX 1.2 transfers BOTH types. The shaping points are there, you just should make them visible and editable again.

Since yesterday I have a Zumo XT. The import is indeed much faster than with Navigator 6.

[Hans van de Ven MR.MRA]

@Stefan-Trucksäß

When you are in the planner, change a shapingpiont into a viapunt. Then export to the device