Frustrating MRA Navigation App - tries to navigate me back to the start if I stop.
-
It's maybe that I'm doing something wrong when planning a route in MRA planner. But when I navigate any route but stop at a waypoint (shaping point) or an unscheduled stop, the route recalculates and tries to navigate me back to the Start Point. I have to pull over and using the Navigation app I edit the route by deleting all the waypoints I have already passed. Very frustrating and I end up having to import the route into the TomTom app and select drive to nearest point option when starting.
MRA Gold Planner + App + Navigation Next user
Android Pixel 9 Pro XL
TomTomGo as backupKTM 1290 Super Adventure S
Quad Lock + Phone +Carpuride W702KTM 790 Duke
Quad Lock + Phone -
Agree.
Have the same problem.
Automatically should navigating to next waypoint. And I have to choose it manually.
Not always "closest" means "next".
There should be a choice for: "First unvisited" or just "Next"
Automatically after stop should navigate to next, not to the start.
-
Hello,
What kind off operating system? Ios or Android?
Do you have the latest version installed?Garmin Zumo XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
Hello,
What kind off operating system? Ios or Android?
Do you have the latest version installed?@Hans-van-de-Ven-MRA-Master
Android 11 -
It's maybe that I'm doing something wrong when planning a route in MRA planner. But when I navigate any route but stop at a waypoint (shaping point) or an unscheduled stop, the route recalculates and tries to navigate me back to the Start Point. I have to pull over and using the Navigation app I edit the route by deleting all the waypoints I have already passed. Very frustrating and I end up having to import the route into the TomTom app and select drive to nearest point option when starting.
@David-Rudgley Just like @Spili mentioned, when you restart the navigation after i.e. stop, you shall manually change the startling point of the navigation from "start of route" to "nearest waypoint". The app does not provide any messages or prompts about that, which on this forum has been commented on several times. Something for the future roadmap end of this year!
-
Do you close the app during the pause?
Garmin Zumo XT2/XT/BMW Connected Ride Navigator/MyRouteapp (The App)
Een dag niet gelachen is een dag niet geleefd / Een route is net zo goed als deze uitgezet is. -
Do you close the app during the pause?
@Hans-van-de-Ven-MRA-Master No, often it's me removing the phone from the mount with the app still running and turning the display off while it's either in my pocket of in storage
-
Do you close the app during the pause?
@Hans-van-de-Ven-MRA-Master said in Frustrating MRA Navigation App - tries to navigate me back to the start if I stop.:
Do you close the app during the pause?
I recognize this. I am not sure if it has been corrected already, But I think that even with NOT closing the app, but just restarting the route, that option defaults back to "Beginning of route". I have made comments about this before, to make that option an application option instead of a route option (that seems to be not permanently).
I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Streetpilot 2610/Zumo 660/Zumo 395/ CAT S52 + MRA app -
@Hans-van-de-Ven-MRA-Master said in Frustrating MRA Navigation App - tries to navigate me back to the start if I stop.:
Do you close the app during the pause?
I recognize this. I am not sure if it has been corrected already, But I think that even with NOT closing the app, but just restarting the route, that option defaults back to "Beginning of route". I have made comments about this before, to make that option an application option instead of a route option (that seems to be not permanently).
@Con-Hennekens When you restart the route, the app will take you to the first point. However, you can see where you are and then select the next WP via "Edit route settings" as explained above. Maybe later it will be possible to select the WP directly. lg Kudee
-
@Con-Hennekens When you restart the route, the app will take you to the first point. However, you can see where you are and then select the next WP via "Edit route settings" as explained above. Maybe later it will be possible to select the WP directly. lg Kudee
@Kudee I will be using the app again on a tour this coming weekend so I will use the route option navigate to closest WP or specific WP # and load the maps into TomTom Go as a back up
-
@Con-Hennekens When you restart the route, the app will take you to the first point. However, you can see where you are and then select the next WP via "Edit route settings" as explained above. Maybe later it will be possible to select the WP directly. lg Kudee
@Kudee said in Frustrating MRA Navigation App - tries to navigate me back to the start if I stop.:
@Con-Hennekens When you restart the route, the app will take you to the first point. However, you can see where you are and then select the next WP via "Edit route settings" as explained above. Maybe later it will be possible to select the WP directly. lg Kudee
Yes, that's what I am saying. So the option that says "start at closest waypoint" is not permanent, and therefore meaningless. It should be an application-options, not a route-option and certainly not one that defaults back to what you did not choose before.
I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Streetpilot 2610/Zumo 660/Zumo 395/ CAT S52 + MRA app -
@Kudee said in Frustrating MRA Navigation App - tries to navigate me back to the start if I stop.:
@Con-Hennekens When you restart the route, the app will take you to the first point. However, you can see where you are and then select the next WP via "Edit route settings" as explained above. Maybe later it will be possible to select the WP directly. lg Kudee
Yes, that's what I am saying. So the option that says "start at closest waypoint" is not permanent, and therefore meaningless. It should be an application-options, not a route-option and certainly not one that defaults back to what you did not choose before.
@Con-Hennekens What I do during a stop for lunch or whatever other reason is pause the route and when I continue just touch the screen to restart and the route is displayed exactly where it was paused.
I don't stop the route or anything, just pause it and it works fine for me everytime. -
When using a ride I made, saved as a Harley GPX, and then use in a Harley Boom Box and I have this problem, when I get back on bike I look for the ride in the boom box, find the ending waypoint and click on it and it works every time
-
@Con-Hennekens What I do during a stop for lunch or whatever other reason is pause the route and when I continue just touch the screen to restart and the route is displayed exactly where it was paused.
I don't stop the route or anything, just pause it and it works fine for me everytime.@Albert-Renting said in Frustrating MRA Navigation App - tries to navigate me back to the start if I stop.:
@Con-Hennekens What I do during a stop for lunch or whatever other reason is pause the route and when I continue just touch the screen to restart and the route is displayed exactly where it was paused.
I don't stop the route or anything, just pause it and it works fine for me everytime.I tend to check the route, where we are exactly and where shortcuts or detours are possible. Therefore it is not possible to not stop the route. You should be able to restart aroute given the available options to do so, but they do not work as intended. That's called a bug
I am just an enthusiastic MRA user, and hope you will be one too!
Most motorcycle problems are caused by the nut that connects the handlebar to the saddle.
Streetpilot 2610/Zumo 660/Zumo 395/ CAT S52 + MRA app -
@Albert-Renting said in Frustrating MRA Navigation App - tries to navigate me back to the start if I stop.:
@Con-Hennekens What I do during a stop for lunch or whatever other reason is pause the route and when I continue just touch the screen to restart and the route is displayed exactly where it was paused.
I don't stop the route or anything, just pause it and it works fine for me everytime.I tend to check the route, where we are exactly and where shortcuts or detours are possible. Therefore it is not possible to not stop the route. You should be able to restart aroute given the available options to do so, but they do not work as intended. That's called a bug
@Con-Hennekens Even then it is possible. Start the desired route and then skip to the next waypoint from the location where you are at and you will be guided first to that next waypoint and then the route will be followed.
-
@Con-Hennekens Even then it is possible. Start the desired route and then skip to the next waypoint from the location where you are at and you will be guided first to that next waypoint and then the route will be followed.
@Albert-Renting, Yes Albert, but that is not what you would expect from a feature called "Start at closest waypoint" now, is it? I have been using Navigation from the get go, so I know how it works
-
This wouldn't be an issue if the App was stable, reliable and didn't reset the route numerous times during a ride. I will continue to use TomTom Go app until I can be confident that these issues have been fixed, fingers crossed that the new version of the MRA Navigation App is an improvement on the current build.
