MRA AI Routeplanner - Improvement
-
I think you'll get more interest in the AI planner if you describe the main features-to-benefits on the initial page. A lot of people will stop at the 'Start free trial' first screen call-to-action, without learning anything about the AI benefits first, i.e. move these from the purchase page to the initial landing page:
- Design routes from a chat
- Camper mode: routes your camper actually fits
- Weather forecasts: the best time to leave
- Multi-day tour planning
- Scenic & winding suggestions
- POIs along the way
- Refine by just asking
Secondly, I suspect 2 days/ 150 credits isn't going to allow beta testers to give you as much feedback as you may want - but without committing to starting the 2 days, I can't tell!
So here goes.
I'll report back on this thread once I've had a go at what I regard as a realistic test route (up the UK and back down again in 4-5 days).
-
TLDR
- Let trialists know roughly how much planning that they can do before the trial actually starts (in real terms, not credits)
- Have a setting that doesn't force stops to be 'via' points, OR allow the engine to replace 'via' points en masse with normal waypoints (petrol stations that you ride past because you didn't need petrol, but were marked as a 'via' point drive me crazy)
- Consider allowing imports of existing routes into AI, so you can refine them easily using AI (big effort I know, but as a future feature)
Detail
10 minute feedback which I needed to know before commiting to a trial:
Your free trial's credits cover about 4 days of a trip like this, not all 6 days of a Land's End to Dunnet Head round trip. I can start with a short ride of about 2 hours from where you live instead, because on roads you know you can judge the result straight away.
Which would you prefer: the short ride (and if so, from where), or this Land's End to Dunnet Head trip anyway?I would have preferred to know this on the initial start page before committing to a trial.
OK, I ran it as a 3 day trip only - just going north, bottom to top of the UK:
- 5 minutes to auto-calculate all 3 days - nice and quick.
- 84 credits used, so just over half my trial credits - in 5 minutes.
Had to add another overnight stop (I forgot how big Scotland is):
- 112 credits used
The route is good, but I really dislike 'via' points, having been caught out far too often by being forced to go places I didn't need to, so my next request to AI was:
Request:
Change all via points to be just plain waypoints? Don't change anything else about them, though.Answer:
I can't change that from here. I only choose each stop's name, type, position and visit time when I build a day, and I have no setting for a stop being a "via" point or a plain waypoint. The routing engine and the app handle that, so you would need to change it in the app's route editor.I also can't edit a day without rebuilding it. Rebuilding could shift the routes, so I'd rather not do that when you want everything else left as it is.
Request:
You can't place a 'stop' without making it a 'via' point?Answer:
I can't say, because I can't see how the app labels stops after I build a day. What I send is a list of places in order. Each has a name, a type, a position and, if you pause there, a visit time. Whether the app shows one as a via point or a waypoint is decided on its side, and nothing I send sets or reveals that.- 128 credits spent
The estimate of 4 days planning with the trail credits is broadly accurate, so I appreciate that part, and the route looks usable and realistic, so good marks for that. I didn't attempt any overnight hotels/stays, etc.
-
Thanks for testing it this thoroughly, and for the honest numbers. They help a lot.
I’ll make these changes:l
- The trial start screen will show roughly what the trial covers (about 5 day rides, or 4 days of a longer trip) and what the planner can do, before the 2 days start.
- The points the planner adds only to steer the route along the right roads are now saved as plain shaping points, not via points. Navigation won't send you to them any more. The start, the finish, your overnight stop, places you asked for and stops it plans a break at (like a fuel stop it gives time) stay via points.
- The planner now knows this too. Ask it about via points and it will tell you how to change them yourself: open the route in the planner, tap Select in the waypoint list, select the waypoints, tap Edit and choose Shaping. That also works for routes you saved before this change.
Importing an existing route into the AI planner is a good idea for later. I've noted it.
Glad to hear the 4-day estimate was right. These changes go live with the next beta update.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login